Using Your Irrigation Controller


The Hunter PCC-600i Controller with Solar Sync has been installed in homes in The Villages for the last several years. Useful links are listed below for assisting you with programming or troubleshooting.

Owner’s Manuals

PCC-Series Owner’s Manual

Solar Sync Owner’s Manual

The Solar Sync is a sensor system that, when connected to Hunter PCC, will automatically adjust your controller watering based upon changes in local climate conditions. The Solar Sync utilizes a solar and temperature sensor to measure on-site weather conditions used to determine evapotranspiration (ET), or the rate at which plants and turf use water. In addition, the Solar Sync sensor includes a Hunter Rain-Clik that will shut down your irrigation system when it rains. For programming instructions of your Hunter Solar Sync, please refer to the Solar Sync’s owner’s manual.

Helpful Videos


Manual Operation with a Hunter Controller


How to Reset a Hunter Controller


Display Troubleshooting on a Hunter Controller


Controllers - Programming Multiple Programs Part 1 of 4: Introduction, Time/Date


Controllers - Programming Multiple Programs Part 2 of 4: Program A


Controllers - Programming Multiple Programs Part 3 of 4: Program B


Controllers - Programming Multiple Programs Part 4 of 4: Other Modes


Canceling Extra Start Times on Hunter Controller


Solar Sync Product Guide: Smart Irrigation Control Made Simple


Solar Sync – Programming – Part 1 of 2: Controller Setup


Solar Sync - Programming - Part 2 of 2: Programming the Solar Sync Module